oelheld SintoGrind SHPG Grinding Oils

SintoGrind SHPG Grinding Oils:

Grinding to perfection with the new fully synthetic SHPG-fluids of oelheld:

oelheld faces the challenges for the future. The demand on high-quality moulds and contours has risen as well as the demand on suitable tools and even higher processing speeds - the future environmental demands are being met even today.

With SintoGrind the new fully synthetic SHPG-fluids (super high performance grinding) oelheld succeeded in giving the answer to these challenges.

The new fully synthetic SHPG-fluids of oelheld offer the following advantages in comparison to water soluble products:

  • no down time of the machine
  • Optimal rust protection
  • reduction of the working processes
  • additional machine lubrication
  • neutral to paint
  • water danger class 1
  • physiologically harmless
  • free of aromatics
  • no supervision necessary
  • no sticking, no thickening
  • no formation of foam

    SintoGrind HM:
    SintoGrind HM is a new formulated high-tech-product on synthetic basis (PAO). It is particularly suitable for HSS and HM processing (e.g. hard metal drills and hard metal tools). SintoGrind HM has a low evaporation loss, a high cleaning capacity and a sludge-bearing capacity.

    SintoGrind TTS:
    SintoGrind TTS is a newly formulated, nearly waterclear high-tech-product on synthetic basis (PAO) for universal use. SintoGrind TTS has a very low oil-mist and evaporation loss. It is completely free of aromatics and protects the valuable grinding wheels. It offers optimal protection against cobalt accumulation and can be filtered with all common filter systems. Edge type filtration systems are particularly suitable.

    SintoGrind TTK:
    SintoGrind TTK is is a newly formulated high-tech-product on PAO-basis - particularly suitable for HSS and HM machining. SintoGrind TTK has very low oil-mist and evaporation losses, is extremly low in foam, even at the highest cleaning pressures. It offers optimal protection against cobalt accumulation and can be filtered with all common filter systems. Ege type filter systems are particularly suitable.

    SintoGrind 353:
    SintoGrind 353 is also a newly formulated high-tech-product on synthetic basis. It was particularly developed for tooth-flanking-grinding on Reishauer machines. SintoGrind 353 gives optimal machining results and is very economical due to its PAO-structure.

    _________________________________________________________________________

    DiaGrind HPG Grinding Oils:

    The new-formula High Performance Grinding oils from oelheld have considerable advantages over emulsions. Better surface quality is possible with less power in a significantly shorter time. This protects tools, reduces the use of energy and increases output while at the same time optimising quality. Additionally, tool life is lengthened because wear on grinding wheels is decreased.

    DiaGrind TTS:
    DiaGrind TTS is a HPG grinding oil made of high-purity-hydro-crack hydrocarbons for universal use in grinding hard metals and HSS. The intelligent combination of additives guarantees the best possible processing. Cobalt is also permanently prevented from building up in the oil. DiaGrind TTS can be filtered with all the most frequently used filtering systems and they are particularly suitable for edge filters.

    DiaGrind TTK:
    DiaGrind TTK oil of very low viscosity made of high-purity hydro-crack hydrocarbons. It is characterised by a particularly good flushing and cooling ability and very little foam. DiaGrind TTK can be filtered with all the most frequently used filtering systems and they are particularly suitable for edge filters.

    DiaGrind KSB:
    DiaGrind KSB is a HPG grinding oil made of high-purity hydro-crack hydrocarbons for use in HSG grinding processes (e.g. thread or groove grinding) required a higher viscosity.

    _________________________________________________________________________

    DiaMond superfinish oil:

    Superfinishing Oil DiaMond:

    The superfinishing oil DoaMond is a perfectly clear, odourless and tasteless synthetic oil of utmost purity. It is almost free of aromatic compounds and due to its ionic active ingredients and skin protecting additives, it ensures optimal surface quality in conjunction with the greatest possible safety. When used in super finishing or lapping machines, it is excellently suited for use with metal, ceramic and resinoid- bonded grinding and lapping discs, as well as with CBN and diamond grinding discs.

    DIAMOND superfinishing oil is recommended by leading machine manufacturers like Hauser, CH-Biel (Licence-No. 230722).

    DIAMOND offers the following advantages as compared with conventional working oils:

  • life of grinding discs and honing tools
  • cutting rate is increased
  • good cooling effect helps to prevent heat cracks
  • no bad smell, kind to skin non toxic.
  • high quality rinsing together with optimal filtration
  • no dependence, on water quality (hardness and acidity)
  • no rusting, no bacteria
  • no sticking, no thickening
  • no need to watch over emulsion
  • no problems with waste disposal

  • Prime-tech Precision Inc.
    25 Worthington Drive
    Brantford, Ontario, Canada
    N3T 5M1

    Toll Free Canada & USA: 1 (877) 289-2912
    Local / Overseas: 1 (519) 720-9945
    Fax: (519) 720-9929
    Email: sales@prime-tech.ca

    Disclaimer: Prime-Tech Precision Inc. is in no way affiliated with the above mentioned manufacturer(s). Part numbers are for convenience only.

    eXTReMe Tracker